My fellow musicians....I GOT DA KEYBOAD (int)....NOW WHAT DA DO???

[chevonee]

split... now split the board as in.... bass on the low end and keys on the high end?? make sure i understand right... sorry of thats sound stupid... but dont hurt to ask...>.

There ya go my friend....Could it be, might I finally be getting an answer...please say yes...please say yes....please say yes....

[ddw4e]

I going to explain it as I possibly can,

1. Go to Performance Mode

2. Pick any patch

3. Push the F2 key (should be called Voices)

4. Usually what I do for the top that's for the left side and the second one is for the piano so to change the sounds, hit category and go to bass and pick a sound then hit Enter.

5. Do the same for the piano.

6. If you have extra voices in that patch, you can delete them unless you want to do layering...and if you do that do the same steps in step 5).

7. To physically split the board, on the bass sound, you press and HOLD the SF5 button (Limit H) and press the key where you want the highest key to be set at. Then press and HOLD the SF4 (Limit L) and hit the low A key. For the piano sound, press and HOLD the SF$ (Limit L) and press the key you want to start the piano split. (For example, if you end the bass at C4, then you start the piano Lower limit at C#4). To be sure that it's including the keys at the end, HOLD the SF5 button (Limit H) and hit the last C key.

Hope that explains it!

[ddw4e]

May I interupt yalls conversation?

DDW4E, I have patch on my USB drive. Do you know the way to  put it on the keyboard? I use a motif es8, but it should be the same as the mo8

Sorry, I didn't see this bruh, I think it's File, Load. voice

[chevonee]

I going to explain it as I possibly can,

1. Go to Performance Mode

2. Pick any patch

3. Push the F2 key (should be called Voices)

4. Usually what I do for the top that's for the left side and the second one is for the piano so to change the sounds, hit category and go to bass and pick a sound then hit Enter.

5. Do the same for the piano.

6. If you have extra voices in that patch, you can delete them unless you want to do layering...and if you do that do the same steps in step 5).

7. To physically split the board, on the bass sound, you press and HOLD the SF5 button (Limit H) and press the key where you want the highest key to be set at. Then press and HOLD the SF4 (Limit L) and hit the low A key. For the piano sound, press and HOLD the SF$ (Limit L) and press the key you want to start the piano split. (For example, if you end the bass at C4, then you start the piano Lower limit at C#4). To be sure that it's including the keys at the end, HOLD the SF5 button (Limit H) and hit the last C key.

Hope that explains it!

I did it!! I did it!!! I did itttttttttttt!!!!!!!!!

I'm so very very happy...Thank you my dear friend. You have just made a sistah verily (int), verily (int) happier (int)!! A heap much happiness!!





Ok now that we have that out the way, how do I save the sound and recover the sound when I turn the keyboard back on??

[CJKeyboardPlaya]

CONGRATS GURL!!!! I KNEW YOU COULD DO IT!!! Even i didnt tell you... i knew somebody smarter than me was gonna help... but... ne way...


To my understanding... I dont think you can save any sound .... But you know i maybe wrong....

[ddw4e]

I did it!! I did it!!! I did itttttttttttt!!!!!!!!!

I'm so very very happy...Thank you my dear friend. You have just made a sistah verily (int), verily (int) happier (int)!! A heap much happiness!!





Ok now that we have that out the way, how do I save the sound and recover the sound when I turn the keyboard back on??

Wonderful!!! Just hit the Store button (down there by the Job button)

That was hard to explain without my board! LOL Can't believe I remember all of that.

[chevonee]

CONGRATS GURL!!!! I KNEW YOU COULD DO IT!!! Even i didnt tell you... i knew somebody smarter than me was gonna help... but... ne way...


To my understanding... I dont think you can save any sound .... But you know i maybe wrong....

Please don't tell me that. I thought that you could save a sound that you create....

[CJKeyboardPlaya]

like i said... dont hold me to that... others may tell you better news or may know....

[ddw4e]

You can save sounds. When you finished editing /creating sounds, hit the STORE button and that's it.

[CJKeyboardPlaya]

see.... there you go rite there....ill jus ... go... now....

[chevonee]

You can save sounds. When you finished editing /creating sounds, hit the STORE button and that's it.

I have the storing part pretty good but I don't know how to recall the sound when I turn the keyboard back on...Rellllllllllllllllllllp!!!!

[ddw4e]

It should be under the performance mode. if just a sound, I think it be in voice mode under user1 or user2. You have to look for it, but it's there.

[chevonee]

It should be under the performance mode. if just a sound, I think it be in voice mode under user1 or user2. You have to look for it, but it's there.

Gee thanks my friend...I am really starting to the hang of the sound thing. I am still looking for the Rhodes sound, I haven't found it yet. My next objective is to figure out how to make a MIDI, cause I still don't know...

You have really helped me so much and I want you to know that I appreciate your help...You're my HERO Mr. White...*ahem* meant to say Mr. Ddw4e !!

[under13]

I am still looking for the Rhodes sound, I haven't found it yet.

All you gotta do is be in voice mode, and category search, and choose the 'keyboard' catagory and wichever one you want. I like the one called R&B soft, but there are other good ones

[chevonee]

All you gotta do is be in voice mode, and category search, and choose the 'keyboard' catagory and wichever one you want. I like the one called R&B soft, but there are other good ones

I like some of those sounds but I still don't see one called "Rhodes"

[under13]

I like some of those sounds but I still don't see one called "Rhodes"

Sorry If I confused you, Fender Rhodes is a type of electric piano, so you wont find a patch called 'rhodes'.  most of the electric piano sounds are emulating a rhodes

[chevonee]

Sorry If I confused you, Fender Rhodes is a type of electric piano, so you wont find a patch called 'rhodes'.  most of the electric piano sounds are emulating a rhodes

Oh ok thanks friend.

[ddw4e]

The "Rhodes-type" sounds are under the Keyboard category.

I am determined to get my board back TONIGHT, even if I have to go up to my bros's house to get it! I actually more concerned about getting my amp back...need my KC550 for a rehearsal on Friday.

[chevonee]

The "Rhodes-type" sounds are under the Keyboard category.

I am determined to get my board back TONIGHT, even if I have to go up to my bros's house to get it! I actually more concerned about getting my amp back...need my KC550 for a rehearsal on Friday.

Tell your bro to give your board back in Jesus' name...LOL!!

[ddw4e]

Tell your bro to give your board back in Jesus' name...LOL!!

I get it tonight! He wasn't home last nite...he went to bible study. I got me some "new toys" yesterday as well