Hey guys, I have an AO 28 pre amp that I replaced from a working B3 few years ago.I had some noise problems that the tech SWORE was in the preamp.Few hundred dollars later-AFTER I swapped for an A100 pre-amp;the buzz turns out to be from the 122.
So basically;I'd like to get some change back.It worked when it came out;safe bet would be to have a tech or somebody like Sebastian go thru it;spiff it up and put it in your B3.Probably NOT the cheapest way;but quick and easy;remove the old one,solder this in +tubes+GO!!!!
Need to have $400.00+shipping( maybe $50 in lower 48? it's heavy)A friend of mine has a paypal account so we can do that or COD. thanks!